Alpha Dent Implants Ltd

Active – is an implant with an aggressive thread. Usedin one- or two-steps protocol in all bone types. The implant is spiral-shaped, conical with triple deep thread for higher retention. Prevents bone injures and enlarges the area of direct contact of the implant’s surface with the bone, which, as a result, speeds up the process of osteointegration. Active is highly suitable for zones with soft bone tissue as its size and area allow to get good primary stability in such zones. The conicity of the implant’s body matches the shape of conical drills for bed preparation.

Active Plus is an implant with aggressive thread. Used in one- or two-steps protocol for all bone types. The implant is spiral-shaped, conical with triple deep thread for higher retention. It prevents bone injures and enlarges the area of direct contact of the implant’s surface with the bone, which, as a result, speeds up the process of osteointegration. Active Plus is highly suitable for zones with soft bone tissue as its size and area allow to get good primary stability in such zones.The upper part of the implant with a microthread has an inverse cone shape which reduces the pressure in the cortical layer, prevents further bone resorption and improves the aesthetics. The conicity of the implant’s body matches the shape of conical drills for bed preparation.

Implant Classic in its upper part has a microthread for a cortical layer. The implant’s body is root-shaped. Due to the thread pitch of 0.6 mm an implant is cylinder-shaped. This implant is mainly used in the first type of bone, but it may be used in all types of bone as well. Due to the triangular shape of the thread in the apical part the implant has qualities of self-tapping.

A thin conical implant Slim is used for the installation in cases of narrow crest or between closely situated teeth implants, and also between permanent implants for temporary restoration. It may be used for immediate loading.

Implant Active Conus has a platform with an inner cone and an hex. Such a platform allows to create a conical joint with supra-structures. This joint is more stable and hermetic.

Implant Classic Conus has a platform with an inner cone and an hex. Such a platform allows to create a conical joint with supra-structures. This joint is more stable and hermetic.

Big Surgical Kit consists of: Ratchet wrench; Wrenches for an abutment screw fixing 9 and 18 mm long, manual; Parallel/Depth Guide- 2 items; Adapter for Implants 18 mm; Stoppers with the length 6, 8, 10, 11.5, 13 mm for drill bits with diameter 2.0 and 2.8; Wrenches for an abutment screw fixing for a torque-measuring wrench, 9 and 18 mm long; Implant drivers for a torque-measuring wrench, 9 and 18 mm long; Implant drivers for a Slim Implants 9 and 18 mm long; Drill bits with the length 1.9, 2.0, 2.8, 3.2, 3.6, 4.5 mm; Conical drill bits with the diameter 2.2, 2.7, 3.3, 3.7, 4.5 (each diameter has a 5 lengths - 6, 8, 10, 11.5, 13 mm long); Countersink 3.2-4.7 and 5-6 mm; Drill extender

A Kit of Conical Drill Bits with Stoppers consist of conical drills with the diameters: 2.2mm (lenght 6, 8, 10, 11.5, 13mm) 2.7mm (lenght 6, 8, 10, 11.5, 13mm) 3.3mm (lenght 6, 8, 10, 11.5, 13mm) 3.7mm (lenght 6, 8, 10, 11.5, 13mm) 4.5 mm (lenght 6, 8, 10, 11.5, 13mm)